Please note PING now requires a serial number for replacement S55 irons to match your existing set of irons.
This compact, multi-material players' iron provides added distance with control while increasing workability and forgiveness. A tungsten toe weight adds forgiveness to improve accuracy, and a stabilizing bar offers distance control. The custom tuning port is made from a thermoplastic elastomer for a soft feel and sound at impact.
Features:
This compact, multi-material players' iron provides added distance with control while increasing workability and forgiveness. A tungsten toe weight adds forgiveness to improve accuracy, and a stabilizing bar offers distance control. The custom tuning port is made from a thermoplastic elastomer for a soft feel and sound at impact.
Features:
Enhanced CTP
The expanded custom tuning port sits lower in the back cavity to promote higher launch, and is made from a thermoplastic elastomer to soften the sound and feel at impact.
Stabilizing Bar
The stabilizing bar is narrower in the long irons to launch the ball higher with greater ball speed. The bar is wider in the shorter irons for a lower ball flight with optimal spin.
Tungsten Toe Weighting
A high-density tungsten toe weight stabilizes the face to increase forgiveness for improved accuracy.
- Available in Men's
- Available in Hand: Right & Left
- Available in Individual Irons: 3, 4, 5, 6, 7, 8, 9, PW
- Serial # Required: Enter the serial number from an existing set to add or replace a club
- Shaft, Lie, Length, and Grip will be determined by the serial number of your club. If custom options are requested, please leave a note in the order under the "Customize Me" button.
- PING Lie Options:
- Maroon - 5° upright
- Silver - 4° upright
- White - 3° upright
- Green - 2° upright
- Blue - 1° upright
- Black - Standard
- Red - 1° flat
- Orange - 2° flat
- Brown - 3° flat
- Gold - 4° flat
- PING Grip Options:
- Orange = +1/16"
- Gold = +1/32"
- White = Standard
- Aqua = -1/64"
- Red = -1/32"
- Blue = -1/16"
Club | Length |
Loft |
Lie |
Offset |
Bounce |
Swing Wt. |
Flex |
Hand |
3 | 38.75" | 21º | 59.25º | 0.17" | 2º | D1 | SR, R, S, X |
RH/LH |
4 | 38.25" | 24º | 60.00º | 0.15" | 3º | D1 | SR, R, S, X | RH/LH |
5 | 37.75" | 27º | 60.75º | 0.12" | 4º | D1 | SR, R, S, X | RH/LH |
6 | 37.25" | 30º | 61.50º | 0.10" | 5º | D1 | SR, R, S, X | RH/LH |
7 | 36.75" | 33º | 62.25º | 0.09" | 7º | D1 | SR, R, S, X | RH/LH |
8 | 36.25" | 37º | 63.00º | 0.07" | 9º | D1 | SR, R, S, X | RH/LH |
9 | 35.75" | 41º | 63.75º | 0.05" | 11º | D1 | SR, R, S, X | RH/LH |
PW | 35.50" | 46º | 64.00º | 0.03" | 12º | D3 | SR, R, S, X | RH/LH |
These are design specifications that may vary due to manufacturing tolerances.
Lie angle based on Black Color Code in standard-length CFS steel shaft.